The EDGE® is an automated extraction system that’s faster than Soxhlet, more automated than QuEChERS, and simpler than other solvent extraction systems. Extract a wide range of samples and sizes at least 3 times faster than other pressurized fluid extractors. This includes filtering, cooling, and washing. The EDGE has revolutionized the extraction process for sample preparation.
- Fastest technique available
- Sample holders are easily assembled and cleaned (Q-Cups)
- Small footprint
- One technology with unlimited applications
Automated Extraction Process
Touch “start” to begin the automated process.
After a rack of Q-Cups containing samples are loaded into the EDGE, simply select the proper method, program the number of samples, and hit “Start”.
The Q-Cup is automatically loaded into the chamber by the autosampler. The pressure cap then creates a pressurized seal on the top of the Q-Cup.
Solvent is first added through the bottom to fill the gap between the chamber and Q-Cup, this aids in heat transfer. Then, solvent is added through the top of the Q-Cup to wet the sample.
As the chamber walls are heated, the pressure in the gap increases. This overcomes the pressure inside the Q-Cup, forcing the solvent to disperse into the sample.
Once the sample reaches temperature, the solvent is dispended through the Q-Disc, the cooling coil, and into a collection vial.
Q-Cup® Sample Holder
A simple solution to a complicated problem.
The aluminum Q-Cup sample holder consists of three easy-to-assemble pieces.
The open top creates a dispersive effect which promotes rapid extraction and filtration. The disposable Q-Discs completely filters your sample prior to analysis. No additional steps are required. The simple design lends itself to easy cleaning.
Get better results with one instrument.
- Dispersive Solid Phase Extraction
- Pressurized Fluid Extraction
- Supported Liquid Extraction
No need for multiple systems for different samples, EDGE is the answer for all extractions, made possible by Q-Cup Technology. No matter your technique, you’ll extract a particle-free solution, ready for analysis.
Q-Dry Solvent Evaporator
No sample transfer necessary.
The Q-Dry is a standalone solvent evaporator that’s compatible with both the 40 mL and 60 mL EDGE collection vials. Sample transfer isn’t necessary, which will save time and reduce your solvent consumption. The temperature can be set on a timer. The nitrogen flow can be easily adjusted.